Rolled English Bridle Leather Collar

A beautiful collar which is made from 3.5 - 4.5mm English leather which is thinned by hand (where the rolling is). This provides an elegant collar sometimes preferred for longer haired dogs. 

As with all our collars the rolled collar incorporates cast solid brass or nickel plate fittings.

Design your own special collar by selecting from the drop down menus.

Please see our measurement guide for selecting the correct size. To our previous customers our guide has been updated so please do check you are purchasing the correct size collar.

 As standard our collars are completely made by hand from the initial cutting out to the final polish. All items we produce are also hand stitched, with collars the thread we choose to use is braided polyester as we have found this tends to last much longer than linen threads which will rot due to salt water and the amount of wear a collar receives.

We are collecting breed/type sizes to determine the avarage size of various breeds. If you could be so kind as to fill this box in it would be most appreciated.

Please do note that the red leather will turn brown eventually and all the colours do darken with age. This is due to dirt and grease getting into the leather. How long this process takes completely depends on how much wear and tear the collar receives. While we take every precaution to ensure colour fastness we cannot guarantee some colour transfer may occur.

Please note as this collar is thinned if used with a dog which tends to pull the leather can stretch.

The width measurements are for the area where the buckle fastens and is the widest part of the collar. Unless you have a dog with a large neck size we don't recommend the 1" collar as the roll is a little bulky on smaller collars.

Please allow 2 - 3 weeks for delivery.